Table of Contents
Advertisement
146
Chapter 9 CLI Command Set
Access level: 2
Max-Online-User
Use this command to set the maximum number of online users
this AP permits.
Syntax: max-online-user <port> <count>
no max-online-user <port>
Possible value:
Port: lan,wlan1,wlan2
Count: 1-256
Default value: count: 256
Access level: 2
NAT Enable/Disable
Use this command to enable or disable NAT.
Syntax: nat {enable|disable}
Default value: Enabled
Access level: 2
Advertisement
Table of Contents
