Introduction - Mitsubishi Electric NZ2EX2B-60AD4 User Manual

Thank you for purchasing the CC-Link IE Field Network analog-digital converter module (hereafter abbreviated as A/D
converter module).
This manual describes the operating procedure, system configuration, parameter settings, functions, and
troubleshooting of the A/D converter module.
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the A/D converter module to handle the product correctly.
When applying the program examples introduced in this manual to an actual system, ensure the applicability and
confirm that it will not cause system control problems.
 Relevant modules: NZ2GF2BN-60AD4, NZ2EX2B-60AD4
Remark
Unless otherwise specified, this manual describes the program examples in which the remote I/O signals and remote
registers are assigned for an A/D converter module as follows.
• Remote input signal: RX0 to RX1F (main A/D converter module), RX20 to RX2F (extension A/D converter
module)
• Remote output signal: RY0 to RY1F (main A/D converter module), RY20 to RY2F (extension A/D converter
module)
• Remote register (RWr): RWr0 to RWrF (main A/D converter module), RWr10 to RWr1F (extension A/D converter
module)
• Remote register (RWw): RWw0 to RWwF (main A/D converter module), RWw10 to RWw1F (extension A/D
converter module)
For the assignment of remote I/O signals and remote registers, refer to the following.
 User's manual for the master/local module used
6

INTRODUCTION