Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 155

*1 "Selected Station Communication Status Monitor", which appears at the bottom right in the window, indicates the
communication status of the main A/D converter module. The model name of the main A/D converter module is
displayed as "NZ2GF2B-60AD4" there.
For how to check the error and alarm of the main A/D converter module and extension A/D converter module, refer to
the following:
• How to Check Error Codes and Alarm Codes ( Page 168, Section 11.1)
Some master/local module or simple motion module may not support all the diagnostics.
For details, refer to the user's manual for the master/local module or the simple motion module used.
 User's manual for the master/local module used
 MELSEC-Q QD77GF Simple Motion Module User's Manual (Network)
(a) Remote operation
1.
Select the slave station to be reset and click
2.
In the dialog box that appears (shown below), click
CHAPTER 8 FUNCTIONS
button.
button to start remote reset.
8
153