Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 20

(7) Input and output without an influence of the sequence scan and link scan
Using the external signal assignment function allows a trigger conversion request to be input from the extension
input module. In the event of an error or an alert, an error status or an alert status can be output from the
extension output module.
These input and output are not affected by the sequence scan and link scan.
Ex.
To turn on the lamp when an error occurs.
Main A/D converter module
Extension output module
(8) Support for the CC-Link IE Field Network synchronous communication
function
A/D conversion can be performed together with the synchronization period of the master station that supports the
CC-Link IE Field Network synchronous communication function.
This enables the A/D converter module to operate at the same timing of other slave stations sharing the same
network.
18
An error has
occurred.
An error signal occurred in the A/D
converter module can be output to the
extension output module directly.
Error lamp
(external device)
Programming is not necessary to
turn on an error lamp when an error
occurs.