Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 146

(3) Method for clearing an error by executing the command of the slave station
The following shows how to clear an error by executing the command of the slave station.
Station
list
144
1.
On the "CC IE Field Configuration" window, from
"List of stations", select the main A/D converter
module.
2.
Open the "Command Execution of Slave Station"
window.
[CC IE Field Configuration]  [Online] 
[Command Execution of Slave Station]
3.
Set "Method selection" to "Error clear request" and
click button.
4.
In the window that appears (shown left), click
button.
5.
The error for the A/D converter module is cleared.