How To Mount Modules On A Din Rail - Mitsubishi Electric NZ2EX2B-60AD4 User Manual

6.3.2

How to mount modules on a DIN rail

The usage instructions for a DIN rail stopper is shown as one example. Fix the module according to the manual of the DIN
rail stopper used.
(1) Mounting procedure
Engage the hook on
the bottom side of the DIN rail.
1.
Pull down all DIN rail hooks on the back of the
modules.
The levers should be pulled down until it clicks.
2.
Hang the upper tabs of the modules on a DIN rail,
and push the modules in position.
3.
Lock the DIN rail hooks to the DIN rail to secure the
modules in position.
Push each hook up until it clicks. If the hooks are
beyond the reach, use a tool such as a screwdriver.
4.
Loosen the screw on the DIN rail stopper.
Hook
Hook
5.
Hitch the bottom hook of the DIN rail stopper to the
bottom of the DIN rail.
Hitch the hook according to the orientation of the arrow
on the front of the stopper.
CHAPTER 6 INSTALLATION AND WIRING
6
55