Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 74

5.
Double-click the item to be changed, and enter the setting value.
• Items to be selected from a pull-down list
Double-click the item to be set, and from the pull-down list that appears, select the desired item.
• Items to be entered via text box
Double-click the item to be set, and enter the desired value.
Select an item from the pull-down list.
Enter a value in the text box.
The checkbox cannot be unchecked.
The list cannot be collapsed.
• Station parameter
Mode switch
Conversion speed setting
External signal assignment function
Cyclic data update watch time setting
Extension I/O setting
• Basic module parameter
A/D conversion enable/disable setting
Range setting
72
Setting item
Trigger conversion signal assignment
Input signal error detection signal assignment
Alert output signal assignment
Error flag assignment
Warning flag assignment
Input response time setting
Digital output HOLD/CLEAR setting
Setting item
CH1 A/D conversion enable/disable setting
CH2 A/D conversion enable/disable setting
CH3 A/D conversion enable/disable setting
CH4 A/D conversion enable/disable setting
CH1 Range setting
CH2 Range setting
CH3 Range setting
CH4 Range setting
Reference
Page 86, Section 8.2
Page 89, Section 8.5
Page 146, Section 8.18.1 (2)
Page 145, Section 8.18.1
Reference
Page 89, Section 8.4
Page 99, Section 8.7