Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 164

3.
Open the CC IE Field Configuration window and set up the configuration and station number of a
slave station as shown below.
4.
Close the CC IE Field Configuration window.
[CC IE Field Configuration]  [Close with Reflecting the Setting]
5.
Open the refresh parameter setting window and configure the settings as shown below.
6.
Write the set parameter to the CPU module of the master station, and reset the CPU module, or
turn off and on the power supply.
[Online]  [Write to PLC...]
162
button
button
RESET
or Power OFF ON