Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 15

Term
Remote input (RX)
Remote output (RY)
Remote register (RWr)
Remote register (RWw)
REMTO
Reserved station
Return
Simple motion module
Slave station
Transient transmission
Bit data input from a slave station to the master station (For some areas in a local station, data are input in the
opposite direction.)
 User's manual for the master/local module used
Bit data output from the master station to a slave station (For some areas in a local station, data are output in
the opposite direction.)
 User's manual for the master/local module used
Word data input from a slave station to the master station (For some areas in a local station, data are input in
the opposite direction.)
 User's manual for the master/local module used
Word data output from the master station to a slave station (For some areas in a local station, data are output
in the opposite direction.)
 User's manual for the master/local module used
The abbreviation for ZP.REMTO.
A station reserved for future use. This station is not actually connected, but counted as a connected station
A process of restarting data link when a station recovers from an error
The abbreviation for the QD77GF CC-Link IE Field Network simple motion module
A generic term for stations other than a master station: local station, remote I/O station, remote device station,
and intelligent device station
A function of communication with another station, which is used when requested by a dedicated instruction or
GX Works2
Description
13