Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 221

(18)Digital clipping enable/disable setting
Set whether to enable or disable the digital clipping function for each channel.
For details on the digital clipping function, refer to the following:
• Digital Clipping Function ( Page 117, Section 8.13)
b15 b14 b13 b12 b11 b10 b9
0 0
(a) Enabling the setting
Turn on and off Initial data setting request flag (RY9) to enable the setting.
(b) Default value
The default value is Disabled (1) for all channels.
(c) Remote buffer memory address
The remote buffer memory addresses of this area are as follows:
Remote buffer memory name
Digital clipping enable/disable setting
(19)Scaling enable/disable setting
Set whether to enable or disable scaling for each channel.
b15 b14 b13 b12 b11 b10 b9
0 0
(a) Enabling the setting
Turn on and off Initial data setting request flag (RY9) to enable the setting.
(b) Default value
The default value is Disabled (1) for all channels.
(c) Remote buffer memory address
The remote buffer memory addresses of this area are as follows:
Remote buffer memory name
Scaling enable/disable setting
b8 b7
0 0 0 0 0 0 0
The values of b4 to b15 are fixed to 0.
Main A/D converter module
CH1 CH2
011FH
b8 b7
0 0 0 0 0 0 0
The values of b4 to b15 are fixed to 0.
Main A/D converter module
CH1 CH2
0120H
b6 b5 b4 b3 b2 b1 b0
0 0 0 CH4 CH3 CH2 CH1
0: Enabled
1: Disabled
Extension A/D converter module
CH3 CH4 CH1
021FH
b6 b5 b4 b3 b2 b1 b0
0 0 0 CH4 CH3 CH2 CH1
0: Enabled
1: Disabled
Extension A/D converter module
CH3 CH4 CH1
0220H
APPX
CH2 CH3 CH4
CH2 CH3 CH4
219
A