CHAPTER 2
2.1
Main A/D Converter Module
This section describes part names of the main A/D converter module.
3)
*1
Do not remove this seal because it is used for our maintenance purposes.
No.
Name
1)
Station number setting switch
20
PART NAMES
*1
2)
1)
4)
5)
*1
A rotary switch for the following setting and test.
• Station Number Setting ( Page 50, Section 6.1)
• Offset/Gain Setting ( Page 83, Section 7.3)
• Unit Test ( Page 185, Section 11.5)
When operating the station number setting switch, use a slotted screwdriver with 3.5mm or less width of the tip.
7)
6)
Application
8)