Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 226

(25)Error history clear completed
This remote buffer memory shows the error history clear completed status stored in the non-volatile memory.
(a) Behavior of error history clear
Upon completion of the error history clear, Error history clear completed (address: 1001H) turns to Completed
(1).
For the timing "Not performed (0)→Completed (1)→Not performed (0)", refer to the following:
• Error history clear command ( Page 223, Appendix 3 (24))
(b) Default value
The default value is Not performed (0).
(c) Remote buffer memory address
The remote buffer memory address of this area is as follows:
Remote buffer memory name
Error history clear command
224
b15 b14 b13 b12 b11 b10 b9 b8
0 0 0 0 0 0
The values of b1 to b15 are fixed to 0.
1000H
b7 b6 b5 b4 b3
0 0 0 0 0 0
Main A/D converter module
b2 b1 b0
0 0 0
0: Not performed
1: Completed
Extension A/D converter module
