Mitsubishi Electric NZ2EX2B-60AD4 User Manual page 198

(10)Maximum value/minimum value reset completed flag
This signal turns on when the maximum value stored in CH Maximum value (address: 0601H, 0603H, 0605H,
0607H, 0701H, 0703H, 0705H, 0707H) and the minimum value stored in CH Minimum value (address: 0602H,
0604H, 0606H, 0608H, 0702H, 0704H, 0706H, 0708H) are reset by turning on and off Maximum value/minimum
value reset request (RY1D).
CH
(address: 0601H, 0603H, 0605H, 0607H,
1601H, 1603H, 1605H, 1607H)
CH
(address: 0602H, 0604H, 0606H, 0608H,
1602H, 1604H, 1606H, 1608H)
Maximum value/minimum value reset
request (RY1D, RY2D)
Maximum value/minimum value reset
completed flag (RX1D, RX2D)
(a) Device number
The device numbers of this input signal are as follows:
Maximum value/minimum value reset
completed flag
(11)External power supply monitor state flag
This signal turns on when the external power supply monitoring function is being activated by External power
supply monitor request flag (RY1F).
External power supply monitor
request flag (RY1F)
External power supply monitor
function
External power supply monitor
status flag (RX1F)
For the external power supply monitoring function, refer to the following:
• External power supply monitoring function ( Page 145, Section 8.18.1 (1))
(a) Device number
The device number of this input signal is as follows:
External power supply monitor state flag
196
Maximum value
Minimum value
Signal name
RX1D
Controlled by the A/D converter module
Changed by user
ON
OFF
Disabled
OFF
Signal name
RX1F
Controlled by the A/D converter module
Controlled by the program
Maximum value and
minimum value before reset
ON
OFF
OFF
Main A/D converter module
Changed by user
Enabled
ON
Main A/D converter module
Maximum value and
minimum value after reset
OFF
ON
OFF
Extension A/D converter module
RX2D
OFF
Disabled
OFF
Extension A/D converter module
