SL 750 SHIVER
Inspecting the crankshaft components
Crankshaft axial clearance check
•
The shaft axial clearance on the crank-
case should be checked with a com-
parator mounted on the specific com-
parator support.
•
The clearance should be between 0.1
- 0.4 mm (0.0039 - 0.0157 in).
•
If the clearance is beyond tolerance,
check the reference surfaces.
Specific tooling
020714Y Comparator support
Assembling the connecting rod
CAUTION
TO FIT THE CONNECTING RODS, CHECK THE COUPLING TYPES INDICATED IN THE "CRANK-
CASE- CRANKSHAFT CONNECTING ROD" SECTION, IN THE "CHARACTERISTICS" CHAPTER
OF THE WORKSHOP MANUAL.
Installing the crankshaft
•
Place the left side crankcase half on
the engine support adequately.
•
Place the crankshaft on the seat of the
crankcase half with caution.
Engine
ENG - 63