Engine
Installing the crankshaft
•
Lubricate the crankshaft pins and in-
sert them into their positions.
Refitting the crankcase halves
•
Fit the crankshaft, the complete transmission and the countershaft in the crankcase half.
•
Fit the sealing gaskets on the crank-
case half coupling surface.
•
Join the two crankcase halves tapping
with a hammer.
•
Rotate the engine block so that it is up-
right.
•
Tighten the twenty screws fixing the
crankcase to the prescribed torque.
•
Fit the thrust washer and the seeger
ring on the transmission secondary
shaft.
ENG - 184
TUONO R_FACTORY