Crankshaft Removal - APRILIA RSV4 Factory Service Station Manual

Hide thumbs Also See for RSV4 Factory:

Table of Contents

RSV4 Factory

Mark the piston crown on the exhaust

side so as to remember the refitting po-

Remove the piston.

Crankshaft removal

Separate the crankcases, removing

the lower part

If the heads were removed, position

the specific special tool to keep the pis-

tons from coming out.

Specific tooling

020858Y Device for holding the pistons in the

Unscrew and remove the eight con-

necting rod screws.

Remove the four connecting rod caps.

MARK THE COMPONENTS TO PREVENT INCORRECT RE-

Take out the crankshaft.