List Of Quality Messages And Quality Grades; About Quality Messages And Quality Grades; List Of Quality Messages For Trials - NDD EasyOne Pro Operator's Manual

Performing lung function tests
6.8

List of quality messages and quality grades

6.8.1

About quality messages and quality grades

6.8.2

List of quality messages for trials

Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
End-of-Test criteria, quality criteria, and quality grading are based upon the
published standards [1], [4], [13], [14].
Quality grading is based on the sources [4], [13], [14].
The main articles [2] and [3] do not numerically define the minimum
expiratory peak flow time (PEFT) that is required for an acceptable test. For
EasyOne Pro/LAB, 160 ms is used.
 List of bibliographic references, 137
Immediately after a trial, quality messages help you to give feedback to the
patient as to whether the trial has been acceptable or not. If the trial has not
been acceptable, a recommendation on how to improve is displayed.
Displaying quality messages for trials
To display the quality message for a trial, choose the trial rank from the
parameter table on the result screen
> select test). The trial ranks are given in numbers 1, 2, 3, etc. and may be
crossed out.
Content of quality messages
Quality messages can contain warnings or errors. For example, the quality
messages can provide feedback to the patient as to how to improve the
breathing maneuver or can give you advice about what to do with
EasyOne Pro/LAB.
The following icons indicate who or what is affected.
✓ No action is required.
The problem can be resolved by the patient.
The problem can be resolved by checking EasyOne Pro/LAB.
The following table gives an overview of potential quality messages.
(Patients > select patient > History
93
86/171