Description Of Test Configurations For Easyone Pro/Lab; Utilities > Configuration > Test > General - NDD EasyOne Pro Operator's Manual

Configuration
10.4

Description of test configurations for EasyOne Pro/LAB

10.4.1 Utilities > Configuration > Test > General
Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
Best trial/best value selection
If you choose the Best Trial
assessing the quality of the test and for assessing the interpretation. The trial
with the largest sum of FVC and FEV
ERS.
If you choose the Best Value
selected from different trials for assessing the quality of the test and for
assessing the interpretation. This compiled column shows, for example, the
largest FVC (or FEV ) and the largest FEV
6
tests are unacceptable). Other parameters are taken from the best trial (also
defined by the largest sum of FEV
Curve Overlay
To select which trials are to be displayed in the flow-volume curve and the
volume-time curve on the test result screens, choose the corresponding
check box.
By default, + Session Best
Test Procedure
If you deselect Manual Test
By default, Manual Test Stop
General
To display on the test result screens a comparison of the best trial and the
predicted values as percentage values also for the post, choose
predicted column for post
To display ratio parameters (for example FEV
example 78%) instead of a decimal ratio (for example 0.78), choose
ratio parameter in %.
By default, both check boxes are deselected.
To set the maximum number of trials for forced and slow spirometry, for DLCO
tests, and for MBW tests enter a value between 1 and 99 in the text fields
Number of Trials Forced/Slow, DLCO, and MBW. The default value is 99 in
each case.
option, the complete best trial is selected for
is selected, as suggested by ATS and
1
option, the best single, relevant values are
from all acceptable tests (unless all
1
and FVC).
1
and + Pre Best are selected.
Stop, you enable automatic test stop.
is selected.
tests.
/FVC) as a percentage (for
1
Show %
Show
Max
121
108/171