Utilities > Configuration > Test > Svc; Utilities > Configuration > Test > Mvv; Utilities > Configuration > Test > Dlco - NDD EasyOne Pro Operator's Manual

Configuration
10.4.5 Utilities > Configuration > Test > SVC
10.4.6 Utilities > Configuration > Test > MVV
10.4.7 Utilities > Configuration > Test > DLCO
Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
Print Lung Age
You can choose to print the lung age on reports. When the calculated lung age
is lower than the patient's actual age, the patient's actual age is displayed.
To display the lung age only for smokers, choose
down list. You can set a patient's smoker status when you add patient data to
the database or edit patient data.
To always display the lung age, choose On.
To never display the lung age, choose Off.
The default configuration is
Adding patient data to the database of EasyOne Pro/LAB, 100
Editing patient data with EasyOne Pro/LAB, 100
Parameter
To select which diagnostic parameters to include on the test result screens
and on the printed reports, choose Select.
Viewing and printing reports with EasyOne Pro/LAB, 102
Type
To make regular breathing mandatory before the breathing maneuver, choose
Tidal Breathing Required.
Parameter
To select which diagnostic parameters to include on the test result screens
and on the printed reports, choose Select.
Viewing and printing reports with EasyOne Pro/LAB, 102
Gas Concentration Test-Gas
Enter the test gas concentrations as specified on the gas cylinders into the
fields CO, HE and O . The test gas concentrations must be within the range
2
indicated in parentheses.
Smoker only
Smoker only.
from the drop-
121
115/171