Performing Lung Function Tests With Gas Supply; Mounting The Motor And Valve Unit Onto The Flow Sensor - NDD EasyOne Pro Operator's Manual

Performing lung function tests
6.6

Performing lung function tests with gas supply

6.6.1

Mounting the motor and valve unit onto the flow sensor

Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
CAUTION
INJURY TO THE PATIENT OR THE TECHNICIAN
Incorrect handling of high-pressure gas can cause injury to the patient and/or
gas bottle explosion.
Strictly observe the instructions for handling the DLCO and O
this subchapter.
Before performing a DLCO test or an MBW test, the motor and valve unit must
be mounted onto the flow sensor.
1 Take the motor and valve unit.
2 Take the flow sensor.
3 Attach the motor and valve unit to the flow sensor.
4 Slide the motor and valve unit forward, and release the button.
 The interlock is engaged.
 Performing a DLCO test, 70
Performing an MBW test, 77
gas supply in
2
93
65/171