Utilities > Configuration > General > System Settings; Activating User Handling And Administering User Accounts - NDD EasyOne Pro Operator's Manual

Configuration
10.3.3 Utilities > Configuration > General > System Settings
Element
Length Unit options
Temperature Unit options
Weight Unit options
Hb Unit options
Pressure Unit options
Language options
Show all Test/Device Settings
check box
Patient Entry options
 System Settings
10.3.4

Activating user handling and administering user accounts

Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
Description
To choose between metric and imperial units.
To choose between metric and imperial units.
To choose between metric and imperial units.
Regarding hemoglobin, to choose between the SI unit and the traditionally used unit.
To choose between alternative units.
To change the language after the initial setup.
To display settings for EasyOne Pro/LAB.
To choose between different entry formats for the patient's age.
1 Choose Utilties > Configuration > General > User
2 Enter the default password and choose Login.
 The default password is: 8005
3 To activate user handling, select the
4 To add a user, do the following:
a) Choose Add.
b) Enter a user ID.
c) Enter additional information as required.
d) Choose OK.
5 To edit a user, do the following:
a) Select an existing user.
b) Edit information as required.
c) Choose OK.
6 To delete a user, do the following:
a) Select an existing user.
b) Choose Delete.
c) Confirm the following message.
7 To save the changes, choose OK.
8 To discard the changes, choose Cancel.
 About user handling and the default password, 105
Handling.
User Handling check box.
121
107/171