NDD EasyOne Pro Operator's Manual page 63

Performing lung function tests
Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
 To add trials
1 Choose Add Trial.
2 Repeat the previous procedure To perform the FVC breathing maneuver
and this procedure To add trials until the green Session Complete!
message is displayed.
 To administer the next dose
1 Choose Protocol.
 The provocation protocol screen is displayed indicating the next step.
2 Administer the displayed dose of the provocative agent.
3 Choose Done.
 A countdown of 60 seconds is displayed.
4 When the countdown is up, choose Done.
5 Repeat the previous procedures To perform the FVC breathing maneuver,
To add trials, and this procedure To administer the next dose until the
POSITIVE TEST RESULT message is displayed on the provocation protocol
screen.
 To end the provocation test
1 Grip the spirette with the wrapper again and pull the spirette out of the
spirette holder. Do not touch the spirette.
2 Dispose of the spirette together with the wrapper.
93
63/171