Working With Your Emr System; Processing Orders From Your Emr System - NDD EasyOne Pro Operator's Manual

Connectivity and data exchange
5.2.5

Working with your EMR system

5.2.5.1

Processing orders from your EMR system

Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
If you have interfaced your EMR system with EasyOne Connect or EasyOne Pro/
LAB through the HL7 plug-in or a custom EMR plug-in, you can access the
patient data of your EMR system in the orders menu in EasyOne Connect or on
EasyOne Pro/LAB. On the main menu, the additional
displayed. This procedure represents the order workflow.
Prerequisite
You have configured the HL7 plug-in, the XML plug-in, or a custom

EMR plug-in.
About the HL7 plug-in, 43
About the XML file exchange plug-in, 44
About custom plug-ins, 44
 Additional orders button in the main menu
In the orders menu, you process the orders. The orders menu is similar to the
patients menu. However, you cannot edit patient data in the orders menu.
1 Choose Orders.
2 Select an order with the status Pending.
3 Choose Test.
4 Perform spirometry with the patient.
5 To view a completed order, choose View.
6 To delete an order, choose Delete.
7 Repeat steps 2 to 5 until you have completed all pending orders.
8 Choose Close.
 All results are transmitted to your EMR system.
 Overview of the user interface of EasyOne Pro/LAB, 27
Orders button is
45/171
47