Configuration; About Saving Or Discarding Configuration Changes Of Easyone Pro/Lab; About User Handling And The Default Password - NDD EasyOne Pro Operator's Manual

Configuration

10 Configuration
10.1 About saving or discarding configuration changes of EasyOne Pro/
LAB
10.2

About user handling and the default password

Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
CAUTION
FALSE DIAGNOSIS
Wrong configuration settings can cause incorrect diagnostic calculations.
Be aware that wrong configuration settings can affect the predicted values,
the system interpretation, and the displayed result values.
Verify the configuration settings.
You can change the configuration in different tabs and sub-tabs. After you
have changed the configuration, choose the
screens.
To discard any changes to the configuration, choose the
previous configuration stays in effect.
Utilities > Configuration > General > User Handling
Inactive user handling
If user handling is inactive, all menus and settings are exposed. Sensitive
changes, for example deleting patient data, require authentication.
The default password is: 8005
Active user handling
If user handling is active, users must login. User accounts can be password-
protected.
Security policies, like password strength and password expiration, must be
handled by the operating institution, for example the hospital or practice.
If user accounts are password-protected, users are only prompted for their
password once for login. For sensitive changes, like deleting patient data,
users are not prompted for their passwords again.
Instead, logs include the respective user. Therefore, sensitive changes can be
traced back to individual users.
OK button, which is visible on all
Cancel button. The
121
105/171