Loading And Selecting A Custom Report Layout Of Easyone Pro/Lab; Description Of Printer Configurations Of Easyone Pro/Lab - NDD EasyOne Pro Operator's Manual

Configuration
10.5

Loading and selecting a custom report layout of EasyOne Pro/LAB

10.6

Description of printer configurations of EasyOne Pro/LAB

Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
You can load custom report layouts according to your requirements. For easy
identification you can rename the report layouts. Your EasyOne Pro/LAB
dealer or the ndd Servicing Department can assist you in creating a custom
report layout.
Prerequisite
You have created or received a report layout file with an *.repx file

extension.
You have connected the drive with the report layout file, or you have

copied the report layout file to EasyOne Pro/LAB.
If you want to rename the report layout, you only need to rename the REPX file.
The name of the report layout file is printed on every report.
 To load the report layout file
1 Choose Utilities > Configuration >
2 Choose Load.
3 Navigate to the report layout file, select the file, and choose Open.
4 Read and confirm the warning message about custom report layouts.
 To select your custom report layout
1 From any result screen, choose Report.
2 From the Layout Selection
custom report layout.
Utilities > Configuration > Printer
From the drop-down list, you can choose the default printer from the printers
that you have installed.
With the Refresh button, you can refresh the drop-down list after you have
installed a new printer.
 About compatible printers and printer setup, 20
Report.
drop-down list on the top left, choose your
121
118/171