Overview Of The Plug-Ins For Emr Systems; About The Hl7 Plug-In; About The Gdt Plug-In - NDD EasyOne Pro Operator's Manual

Connectivity and data exchange
5.2.4

Overview of the plug-ins for EMR systems

5.2.4.1

About the HL7 plug-in

5.2.4.2

About the GDT plug-in

Operator's Manual V5.0 • EasyOne Pro/LAB Rev. 05
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
Utilities > Configuration > EMR
The HL7 plug-in allows you to work with orders, which you can process as you
choose. This workflow is the order workflow.
Alternatively, you can use the direct-start workflow and initiate spirometry
from your EMR system.
Supported Features
EasyOne Connect and EasyOne Pro/LAB support the following features of HL7:
• Receiving patient demographics from your EMR system
• Sending test results to your EMR system
• Working with orders
• File-based message exchange
• Message acknowledgments
• Sending discrete data
• Sending reports
 Application Note EasyConnect: HL7 Connector
Application Notes for further information, 3
Operator's Manual of your EMR system
Processing orders from your EMR system, 45
Sending individual test results to your EMR system, 47
With the GDT plug-in, you can only use the direct-start workflow and initiate
spirometry from your EMR system. The order workflow is not supported.
Supported Features
EasyOne Connect and EasyOne Pro/LAB support the following features of GDT:
• Receiving patient demographics from your EMR system
• Sending test results to your EMR system
• File-based message exchange
• Sending discrete data
• Sending reports
 Operator's Manual of your EMR system
Initiating a spirometry test with the direct-start workflow, 46
Sending individual test results to your EMR system, 47
Type, 114
47
43/171