Performing A Firmware Update With Easyone Air - NDD EasyOne Air Operator's Manual

Configuration
11.1.2

Performing a firmware update with EasyOne Air

Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
>
Required material
An SD memory card from the manufacturer

In this menu, you can update the firmware of EasyOne Air.
CAUTION
FAILED UPDATE
An update may fail unnoticed.
After performing an update, restart EasyOne Air and EasyOne Connect and per-
form a calibration check.
Calibration check, 118
Checking for correct operation of EasyOne Air, 122
1 Unlock and open the battery compartment by turning the lock screw
clockwise.
2 Insert the SD memory card into the SD card slot.
117
101/144