Connectivity and data exchange
6.2.5
Overview of the plug-ins for EMR systems
6.2.5.1
About the HL7 plug-in
6.2.5.2
About the GDT plug-in
Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
Utilities > Configuration > EMR
The HL7 plug-in allows you to work with orders, which you can process as you
choose. This workflow is the order workflow.
Alternatively, you can use the direct-start workflow and initiate spirometry
from your EMR system.
Supported Features
EasyOne Connect and EasyOne Pro/LAB support the following features of HL7:
• Receiving patient demographics from your EMR system
• Sending test results to your EMR system
• Working with orders
• File-based message exchange
• Message acknowledgments
• Sending discrete data
• Sending reports
Application Note EasyConnect: HL7 Connector
Application Notes for further information, 3
Operator's Manual of your EMR system
Processing orders from your EMR system, 48
Sending individual test results to your EMR system, 50
With the GDT plug-in, you can only use the direct-start workflow and initiate
spirometry from your EMR system. The order workflow is not supported.
Supported Features
EasyOne Connect and EasyOne Pro/LAB support the following features of GDT:
• Receiving patient demographics from your EMR system
• Sending test results to your EMR system
• File-based message exchange
• Sending discrete data
• Sending reports
Operator's Manual of your EMR system
Initiating a spirometry test with the direct-start workflow, 49
Sending individual test results to your EMR system, 50
Type, 113
50
47/144