Table of Contents
Advertisement
Configuration
11.2.3.4
Activating user handling and administering user accounts
11.2.4
Description of test configurations of EasyOne Connect
11.2.4.1
Utilities > Configuration > Test > General
Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
1 Choose
Utilties > Configuration > General > User
2 Enter the default user name / password and choose Login.
The default user name / password is: admin / 8005
3 To activate user handling, select the
4 To add a user, do the following:
a) Choose Add.
b) Enter a user ID.
c) Enter additional information as required.
d) Choose OK.
5 To edit a user, do the following:
a) Select an existing user.
b) Edit information as required.
c) Choose OK.
6 To delete a user, do the following:
a) Select an existing user.
b) Choose Delete.
c) Confirm the following message.
7 To save the changes, choose OK.
8 To discard the changes, choose Cancel.
About user handling and the default password of EasyOne Connect, 105
Best trial/best value selection
If you choose the
Best Trial
assessing the quality of the test and for assessing the interpretation. The trial
with the largest sum of FVC and FEV
ERS.
If you choose the
Best Value
selected from different trials for assessing the quality of the test and for
assessing the interpretation. This compiled column shows, for example, the
largest FVC (or FEV
) and the largest FEV
6
tests are unacceptable). Other parameters are taken from the best trial (also
defined by the largest sum of FEV
User Handling
option, the complete best trial is selected for
is selected, as suggested by ATS and
1
option, the best single, relevant values are
from all acceptable tests (unless all
1
and FVC).
1
Handling.
check box.
107/144
117
Advertisement
Table of Contents
