Table of Contents
Advertisement
Configuration
11
Configuration
11.1
Configuration of EasyOne Air
11.1.1
Configurations in the settings menu of EasyOne Air
11.1.1.1
Description of device settings of EasyOne Air
Setting
Purpose
Speaker volume
To set the speaker volume
Key click
To enable sound for audible click
feedback
Beep during
To enable a beeping signal during
maneuver
breathing maneuvers as feedback
about air flow
User Logon required
To enable password protection
System Time
To set the time
System Date
To set the date
Date format
To set the format of the date
Time format
To set the format of the time
Patient ID format
To set the format of the patient ID for
compliance with national standards
Description of device settings
Operator's Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
CAUTION
FALSE DIAGNOSIS
Wrong configuration settings can cause incorrect diagnostic calculations.
Be aware that wrong configuration settings can affect the predicted values,
the system interpretation, and the displayed result values.
Verify the configuration settings.
You can configure EasyOne Air in the tools menu.
>
>
>
On this screen, you can choose basic settings for EasyOne Air.
Options
0% – 100%
Selected, deselected
Selected, deselected
Selected, deselected
Numeric entry
Numeric entry
YYY-MM-DD, MM/DD/
YYYY, DD.MM.YYYY
24h (00:00 – 23:59), 12h
(AM/PM)
Numbers only,
Alphanumeric
Default setting
50%
Selected
Selected
Selected
(Not applicable)
(Not applicable)
(Determined by
regional setting at
first-time setup)
(Determined by
regional setting at
first-time setup)
(Determined by
regional setting at
first-time setup)
93/144
117
Advertisement
Table of Contents
