FujiFilm SonoSite Edge II User Manual page 79

Using the touchpad, select the check box for one or more patient exams.
Use Select All to select all patient exams.
To deselect patient exams

Do one of the following:
Clear checked boxes.
Select Clear All.
To edit patient information from the patient list
You can edit the patient name and ID from the patient list instead of from the patient information form if the
exam is closed but has not been exported or archived.
1 In the patient list, select the patient exam.
2 Select Edit.
3 Fill in the form fields, and then select OK.
To append images and clips to a patient exam
Although you cannot add images and clips to a patient exam that is ended, exported, or archived, you can
automatically start a new patient exam that has the same patient information. Depending on your archiver,
the two exams appear as one study when exported or archived.
1 In the patient list, select the patient exam.
2 Select Append. A new patient information form appears. The form has the same information as the patient
exam you selected.
To review images and clips
Note
1 In the patient list, select the patient exam whose images and clips you want to review. The patient row is
highlighted.
2 Select Review on-screen.
3 Select x/x to cycle to the image or clip you want to review.
4 To view a clip, select Play. The clip plays automatically after loading. The load time depends on clip length.
While reviewing a clip, you can do any of the following:
Select Pause to freeze the clip. Select Play again to resume.
Select a playback speed
Imaging
You can review only one patient exam's images and clips at a time.
1x, 1/2x, 1/4x.
4-31