FujiFilm SonoSite Edge II User Manual page 74

2 Select New/End.
A new patient information form appears.
3 Fill in the form fields. For more information, see
4 Select Done. See also
To enable bar code lookup of patient data
WARNING
You can query the worklist for patient data by scanning a Patient ID bar code with the bar code scanner. The
patient data are then automatically entered into the patient information form.

Select Bar Code Auto Lookup on the Connectivity setup page. For more information about the bar code
scanner, refer to the Bar Code Scanner User Guide.
WARNING
To edit a patient information form
You can edit patient information if the exam has not been archived or exported; if a clip, image or calculation
has not been saved; and if the information is not from a worklist.
See "To edit patient information from the patient list"
1 Press the PATIENT key.
2 Make changes as desired.
3 Select one of the following:
Done
Saves your changes and returns to imaging.
Cancel
Discards your changes and returns to imaging.
To end the exam
1 Make sure that you have saved any images and other data you want to keep. See
clips" on page 4-27.
2 Press the PATIENT key.
3 Select New/End. A new patient information form appears.
4-26
"To append images and clips to a patient exam"
To avoid damage to the eye, do not look directly into the beam on the bar
code scanner.
After using the bar code scanner to retrieve patient records, verify that the
patient information is correct. If the patient information retrieved using the bar
code scanner is incorrect, enter the information manually.
"Patient information form fields"
on page 4-30.
on page 4-26.
on page 4-30.
"Saving images and
Imaging