Connecting Transducers - FujiFilm SonoSite Edge II User Manual

Connecting transducers

WARNING
Caution
Note
To connect a transducer
1 Remove the system from the mini-dock (if present), and turn it upside down.
2 Pull the transducer latch up, and rotate it clockwise. Align the transducer connector with the connector
on the bottom of the system.
3 Insert the transducer connector into the system connector.
4 Turn the latch counterclockwise.
Getting Started
To avoid injury to the patient, do not place the connector on the patient. Operate
the ultrasound system in a docking system or on a flat hard surface to allow air
flow past the connector.
To avoid damaging the transducer connector, do not allow foreign material in the
connector.
The system automatically checks for and notifies you of errors when connecting a
transducer.
2-9