FujiFilm SonoSite Edge II User Manual page 33

2 Type the administrator password in the Password box.
If you don't have the administrator password, contact FUJIFILM SonoSite. Refer to
page 1-2.
WARNING
3 Select Login.
To log out as Administrator

Turn off or restart the system.
To require user login
You can set the system to display the User Login screen at startup.
1 Log in as Administrator.
2 In the User Login list, select On.
On requires a user name and password at startup.
Off allows access to the system without a user name and password.
To change the administrator password or let users change passwords
1 Log in as Administrator.
2 Under User List, select Administrator.
3 To change the administrator password:
a Under User Information, in the Password box, type the new password.
b In the Confirm box, type the new password again. For more information about passwords, see
"Choosing a secure password"
4 To let users change their passwords, select the Password changes check box.
5 Select Save.
To enable encryption
1 Log in as Administrator.
2 Enter the encryption key in the text box.
To disable USB export
1 Log in as Administrator.
System Setup
Restoring an administrative password will result in the deletion of data. Back
up all data prior to resetting the administrative password.
on page 3-6.
"Getting help" on
3-3