Presets Setup - FujiFilm SonoSite Edge II User Manual

5 In the Author box, type a unique name.
6 Enter the data.
7 Select Save on-screen.
To display the measurement for the custom table in the calculations menu, see
age and growth analysis"
To edit or delete an OB custom table
1 On the OB Calculations or OB Custom Measurements setup page, select Tables on-screen.
2 Select the OB custom table.
3 Select one of the following on-screen:
Edit. Enter data, and then select Save on-screen.
Delete to remove the custom table. Select Yes.

Presets setup

The Presets setup page enables you to choose some general preferences. Use the following information to
help you choose the presets that are right for you:
Doppler scale

Select cm/s or kHz.
Doppler scale

Select cm/s or kHz.
Duplex
Specifies the screen layout when displaying M Mode trace and Doppler spectral trace:
1/3 2D, 2/3 Trace
Divides the screen so that the top 1/3 shows the 2D image, while the bottom 2/3 displays the trace.
1/2 2D, 1/2 Trace
The 2D image and the trace each occupy 1/2 of the screen.
Full 2D, Full Trace
You can switch between the two full-screen views.
Live Trace

Select Peak or Mean.
3-14
on page 3-11.
"To specify gestational
System Setup