Overdrive Clutch And Coast Clutch Disassembly And Reassembly - Suzuki Liana RH418 Supplementary Service Manual

3) Measure coast clutch piston stroke while applying
and releasing compressed air (400 – 800 kPa, 4 – 8
kg-cm 2 , 57 – 113 psi) through oil hole (1) by using
special tools.
Special tool
(A): 09900–20607
(B): 09900-20701
Coast clutch piston stroke
Standard: 2.68 – 3.02 mm (0.106 – 0.119 in.)
If piston stroke exceeds specified value,
disassemble and inspect inner parts.
Overdrive Clutch and Coast Clutch
Disassembly and Reassembly
Disassembly
1) Remove snap ring (1).
2) Remove retaining plates "R", friction plates "F" and
separator plates "S" in the following order.
R → F → S → F → S → F → R
NOTE
Measure thickness of retaining plate and
record for reference of piston stroke
confirmation.
3) Remove snap ring (1).
4) Remove retaining plates "R", friction plates "F" and
separator plate "S" in the following order.
R → F → S → F → R
NOTE
I2RH01510152-01
Measure thickness of removed retaining
plate and record for reference of piston
stroke confirmation.
Automatic Transmission/Transaxle: 5A-97
S3RH0B5106036
I2RH01510153-01
I2RH01510154-01