Distance Between Torque Converter And Mating Surface Of Transaxle Housing - Suzuki Liana RH418 Supplementary Service Manual

Table of Contents

Advertisement

80) Install transmission range sensor assembly.
a) Place new rubber plate and new lock washer (3)
or transmission range sensor (1).
b) Tighten transmission range sensor lock nut (4).
Tightening torque
Transmission range sensor lock nut (a): 7.0
N·m (0.7 kgf-m, 5.0 lb-ft)
c) Adjust transmission range sensor (1).
d) Tighten transmission range sensor bolts (2).
Tightening torque
Transmission range sensor bolt (b): 25 N·m (
2.5 kgf-m, 18.0 lb-ft)
e) Install manual shift lever (5) with spring washer
and nut.
Tightening torque
Manual lever nut (c): 13 N·m (1.3 kgf-m, 9.5
lb-ft)
81) Install oil cooler pipes (1).
Tightening torque
A/T fluid pipe union bolt (color: green) (a): 27
N·m (2.7 kgf-m, 19.5 lb-ft)
A/T fluid pipe union bolt (color: silver) (a): 35
N·m (3.5 kgf-m, 25.5 lb-ft)
A/T fluid pipe (b): 35 N·m (3.5 kgf-m, 25.5 lb-ft)
A/T fluid pipe nut (c): 18 N·m (1.8 kgf-m, 13.0 lb-
ft)
Automatic Transmission/Transaxle:
NOTE
Make sure to use new gaskets (2).
82) Install torque converter (1) to input shaft.
a) Install torque converter (1), using care not to
damage oil seal of oil pump.
b) After installing torque converter (1), check that
distance "a" is within specification.
Distance between torque converter and
mating surface of transaxle housing (3)
"a": More than 21.4 mm (0.843 in.)
c) Check torque converter (1) for smooth rotation.
CAUTION
!
• Before installing converter, make sure that
its pump hub portion is free from nicks,
burrs or damage which may cause oil seal
to leak.
• Be very careful not to drop converter on oil
pump gear. Damage in gear, should it
occur, may cause a critical trouble.
I2RH01510267-01
I3RH0B510016-01
I2RH01510269-01
2. Flange nut
5A-131

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents