Dtc P0705 (No.34): Transmission Range Sensor Circuit Malfunction (Prndl Input) - Suzuki Liana RH418 Supplementary Service Manual

DTC P0705 (No.34): Transmission Range Sensor Circuit Malfunction (PRNDL Input)

Wiring Diagram
3
RED/BLK
1. TCM
2. Transmission range sensor
3. From ignition switch
DTC Detecting Condition and Trouble Area
DTC detecting condition
• Transmission range switch signal (P, R, N, D, 2 or L) is not
inputted for more than 25 seconds at more than 60 km/h
(35 mile/h) vehicle speed.
• "D" range signal and other one or more signals are
inputted simultaneously for 10 seconds.
DTC Confirmation Procedure
WARNING
!
• When performing a road test, select a place where there is no traffic or possibility of a traffic
accident and be very careful during testing to avoid occurrence of an accident.
• Road test should be carried out with 2 persons, a driver and tester, on a level road.
1) Clear DTCs in TCM memory and start engine.
2) Shift select lever to each of "L", "2", "D", "N", "R" and "P" ranges for 20 seconds each.
3) Start vehicle and increase vehicle speed to about 70 km/h (44 mile/h) in both "D" and "2" range.
4) Keep driving the vehicle speed for 30 seconds.
5) Release accelerator pedal, decrease vehicle speed and stop vehicle.
6) Turn ignition switch OFF.
7) Repeat Step 3) to 6) one time.
8) Check DTC.
2
4 6
P
R
N 5
D
2
L
G08
4. Brake light switch
5. Backup lamp
6. Shift lock solenoid
Automatic Transmission/Transaxle:
WHT/BLK
G07-2
RED G07-1
WHT/RED G07-9
YEL/RED G07-8
G07-21
YEL
G07-20
RED/BLU
G07
2
9
21 20
7. Terminal arrangement of TCM connector (viewed from harness side)
• Select cable maladjusted.
• Transmission range sensor (switch) maladjusted.
• Transmission range sensor (switch) or its circuit
malfunction.
• TCM
S3RH0B5104022
1
7
1
8
I2RH01510020-01
Trouble area
5A-35