Counter Driven Gear Disassembly And Reassembly - Suzuki Liana RH418 Supplementary Service Manual

5A-114 Automatic Transmission/Transaxle:
Counter Driven Gear Disassembly and
Reassembly
Disassembly
1) Clamp counter driven gear (1) with special tool and a
vice (2).
Special tool
(A): 09921-57810
2) Unstake lock section of counter shaft driven gear
lock nut.
3) Remove counter shaft driven gear lock nut, using
special tool.
Special tool
(B): 09927-76050
NOTE
Do not reuse counter shaft driven gear lock
nut once removed.
4) Remove cylindrical roller bearing inner race (1) by
pressing differential drive pinion (2), using hydraulic
press (3).
Reassembly
1) Press differential drive pinion (2) to counter driven
S3RH0B5106051
gear (1), using hydraulic press (3).
2) Apply A/T fluid to inner surface of cylindrical roller
bearing inner race.
3) Press cylindrical roller bearing inner race (1), using
special tool and hydraulic press (2).
Special tool
(A): 09951-16060
4) Tighten new counter shaft driven gear lock nut, using
I2RH01510208-01
special tools.
Special tool
(A): 09921-57810
(B): 09927-76050
Tightening torque
Counter shaft driven gear lock nut (a): 160 N·m (
16.0 kgf-m, 116 lb-ft)
I2RH01510209-01
I2RH01510210-01
I2RH01510211-01
I2RH01510212-01