Diagnostic Information And Procedures (Engine); Engine And Emission Control System Check - Suzuki Liana RH418 Supplementary Service Manual

1A-13 Engine General Information and Diagnosis:

Engine and Emission Control System Check

Refer to the following items for the details of each step.
Step
1 Customer complaint analysis
1) Perform customer complaint analysis referring to
"Customer Complaint Analysis".
Was customer complaint analysis performed?
2 DTC(s) check, record and clearance
1) Check for DTC (including pending DTC) referring to the
"DTC(s) Check, Record and Clearance".
Is there any DTC(s)?
3 Visual inspection
1) Perform visual inspection referring to "Visual Inspection".
Is there any faulty condition?
4 Visual inspection
1) Perform visual inspection referring to "Visual Inspection".
Is there any faulty condition?
5 Trouble symptom confirmation
1) Confirm trouble symptom referring to the "Trouble
Symptom Confirmation".
Is trouble symptom identified?
6 Rechecking and record of DTC
1) Recheck for DTC referring to "DTC Check".
Is there any DTC(s)?
7 Rechecking and record of DTC
1) Recheck for DTC referring to "DTC Check".
Is there any DTC(s)?
8 Engine basic inspection and engine symptom diagnosis
1) Check and repair according to "Engine Basic Inspection"
and "Engine Symptom Diagnosis".
Are check and repair complete?
9 Troubleshooting for DTC
1) Check and repair according to applicable DTC diag. flow.
Are check and repair complete?
10 Intermittent problems check
1) Check for intermittent problems referring to "Intermittent
Problems Check".
Is there any faulty condition?
11 Final confirmation test
1) Clear DTC if any.
2) Perform final confirmation test referring to "Final
Confirmation Test".
Is there any problem symptom, DTC or abnormal condition?
Diagnostic Information and Procedures
Action Yes
Go to Step 2.
Print DTC or write it
down and clear it by
referring to "DTC
Clearance", and go to
Step 3.
Repair or replace
malfunction part, and go
to Step 11.
Repair or replace
malfunction part, and go
to Step 11.
Go to Step 6.
Go to Step 9.
Go to Step 9.
Go to Step 11.
Go to Step 11.
Repair or replace
malfunction part(s), and
go to Step 11.
Go to Step 6.
S3RH0B1104001
No
Perform customer
complaint analysis.
Go to Step 4.
Go to Step 5.
Go to Step 8.
Go to Step 7.
Go to Step 8.
Go to Step 10.
Check and repair
malfunction part(s), and
go to Step 11.
Check and repair
malfunction part(s), and
go to Step 11.
Go to Step 11.
End.