Dell-4 Vlt Configuration - Dell S6100 Configuration Manual

The following output shows that Dell-4 and VLT domain 120 form OSPF neighborship with Dell-3.
Dell-3#sh ip ospf nei
!
Neighbor ID Pri State
4.4.4.4 1 FULL/ - 00:00:33
1.1.1.1 1 FULL/ - 00:00:34

Dell-4 VLT Configuration

vlt domain 110
peer-link port-channel 110
back-up destination 10.1.1.0
primary-priority 24576
system-mac mac-address 02:01:e8:d8:93:02
unit-id 1
peer-routing
! proxy-gateway static
remote-mac-address 00:01:e8:d8:93:07
remote-mac-address 00:01:e8:d8:93:e5
These MAC addresses are the system L2 interface addresses for each switch at the remote site, Dell-1 and Dell-2.
interface Vlan 102
description ospf peering vlan to DELL-3
ip address 10.10.102.2/30
ip ospf network point-to-point
no shutdown
The following is the OSPF configuration on Dell-4.
router ospf 1
router-id 1.1.1.1
network 10.10.102.0/30 area 0
The following output shows that Dell-4 forms OSPF neighborship with Dell-3.
ELEM-2#sh ip ospf nei
!
Neighbor ID Pri State
3.3.3.3 1 FULL/ - 00:00:32
With the above configuration, the two VLT domains act as VLT proxy gateways for any host that is moved from one VLT domain to
another.
Dead Time Address
10.10.101.1 Vl 101
10.10.102.2 Vl 102
Dead Time Address
10.10.102.1 Vl
Interface Area
0
0
Interface Area
102
VLT Proxy Gateway 993