To return to the default cycle from within any menu, press the Menu button repeatedly until
the Exit menu appears, then press the Next button. Alternatively, allow the DVS 605 to
time-out (after 20 seconds).
Submenus are accessed from a main menu by pressing the Next button. When within a
submenu, press the Menu button to go out of the submenu and back to the active main
menu.
User Presets
This menu allows the user to save or recall up to 16 presets for the selected input, shown as
INx
on the LCD screen.
To use this menu, press Next to get the relevant submenu, Recall or Save.
When within the submenu, use the Adjust knobs to select the preset to save or recall.
Press Menu to exit the submenu.
USER
PRESETS
Figure 11.
Picture Control
This menu allows the user to adjust various picture control settings such as horizontal and
vertical window positioning, horizontal and vertical window size, brightness and contrast,
color and tint, and detail settings for the selected input. The selected input is shown as
the LCD screen.
To use this menu press Next to get the relevant submenu.
When within the submenu, use the Adjust knobs to select and then adjust the values as
desired.
Press Menu to exit the submenu.
PICTURE
CONTROL
Figure 12.
Next
Next
INx RECALL
<N/A>
Rotate either to
select a preset to
recall settings.
User Preset Menu
Next
Next
xH
POS V
+00000+00000
Rotate
to adjust
window horizontal
position.
Rotate
to adjust
window vertical
position.
Next
Next
xCOL
TINT
064*
*064
Rotate
to adjust
color.
Rotate
to adjust
tint (* = default).
Picture Control Menu
INx SAVE
<02>
Rotate either
to select a preset
to save current
settings.
Next
xBRIT CONT
xH SIZE V
00000 00000
064*
Rotate
Rotate
to adjust
brightness.
window horizontal
Rotate
size.
contrast (* = default).
Rotate
to adjust
window vertical size.
x DETAIL
*064
Rotate either to
set detail level
(* = default).
DVS 605 • Operation
x
on
Next
*064
to adjust
to adjust
16