Lamp Power Supply Components - Christie D4K3560 Setup Manual

Lamp power supply components

ID Item
A Extractor AC power outlet
B Projector AC power outlet
C Main LPS breaker
D Projector interlock and
communication
connections
E DC lamp power cables
F Lamp breaker
G Outlet breaker
H Power phase indicator
lights
I LPS power inlet
D4K3560 Setup Guide
020-101161-05 Rev. 1 (06-2015)
A
B
F
G
H
I
Description
Powers an approved extractor unit. Do not use this outlet to power other
devices.
Powers the projector head. Do not use this outlet to power other devices.
Acts as a power switch, protecting the lamp power supply (LPS) against over-
current conditions of 50A or more.
Provides communication between the projector and the LPS.
Carries power from the LPS to the projection lamp.
Acts as a power switch, protecting the LPS against over-current conditions of
50A or more.
Acts as a power switch, protecting the extractor and the projector electronics
against over-current conditions of 15A or more.
Indicates the power on each of the three phases.
Supplies power to the LPS. This connection must be professionally wired,
according to local regulations.
Installation and Setup
D
C
E
14