Installation Safety And Warning Guidelines; Position The Cinema Projector And Lamp Power Supply - Christie CP4230 User Manual

2.4

Installation Safety and Warning Guidelines

WARNING
installed in a restricted access location.
WARNING
WARNING
erly handled. Always wear manufacturer approved protective safety clothing (gloves, jacket,
face shield) whenever the lamp door is open or when handling the lamp. Only qualified tech-
nicians should install cinema projector lamps.
WARNING
the safety strap on the rear of the cinema projector.
WARNING
short distance. Remove the lamp before transporting the cinema projector.
cinema projector to the right. This can introduce an air bubble into the coolant hoses that can
result in an air lock and the overheating of the cinema projector.
new lamp in the cinema projector.
2.5

Position the cinema projector and Lamp Power Supply

1. If you are installing the cinema projector in the optional rack stand (P/N 108-282101-xx) follow the
instructions provided with the rack stand to install it.
NOTES: 1) For better access, wire the LPS before installing it into the rack stand. 2) Use the hold down
clamp (P/N 116-100101-01) when securing the cinema projector to the rack stand.
2. Position the cinema projector at an appropriate throw distance (cinema projector-to-screen distance) and
vertical position. Ideally, center the cinema projector with the theatre screen. If space is limited, aim the
cinema projector slightly off-center. This increases side keystoning, but reduces the horizontal lens offset
required.
NOTE: Keep the cinema projector lens as parallel to the screen as possible, even if significantly above the
screen center. When a particularly short throw distance combines with a very wide screen, you may have to
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)
QUALIFIED TECHNICIAN REQUIRED for all installations. This product must be
Never operate the cinema projector without all of its covers in place.
The cinema projector uses a high-pressure lamp that may explode if improp-
To prevent the cinema projector from tipping unexpectedly, you must install
our or more people are required to safely lift and carry one projection head a
Keep the cinema projector level when you lift or transport it. Avoid tilting the
Perform a automatic LampLOC™ adjustment when you move, level, or install a
Section 2: Installation and Setup
2-5