Ac Relay - Christie D4K35 Service Manual

5.11.2 AC Relay

(Estimated Replacement Time: 40 minutes)
The AC relay is located between the blower and igniter shielding with the fire alarm interlock directly in front
of it, the PVC cover over the relay has cutouts for access to the 3mm hex screws.
1. Remove the rear right skin. Refer to
Right Skin (ignitor/blower
2. Remove the front top lid. Refer to
Top Lid.
3. Open the lamp door. Refer to
4. Rotate the rear top lid to gain access to the
igniter/blower compartment. Refer to
Rear Top Lid.
5. Using a 3mm hex key, remove the screw
closest to the blower and loosen the screw
closest to the igniter shield. (Figure 5-45)
6. Lift the PVC shield to one side to gain access to
the AC relay.
7. Tilt the AC relay and use a #2 Phillips
loosen the six screws securing the harnesses.
8. Disconnect the eight harnesses.
9. Remove the AC relay.
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)
5.4.4 Rear
compartment).
5.4.2 Front
5.4.8 Lamp Door.
5.4.12
to
™
Section 5: Parts and Module Replacement
Figure 5-45 Remove AC Relay
5-29