Displaying And Maintaining Ipv6 Pim; Ipv6 Pim Configuration Examples; Ipv6 Pim-Dm Configuration Example - HPE FlexNetwork 5510 HI Series Configuration Manual

Step
Enable SNMP notifications
2.
for IPv6 PIM.

Displaying and maintaining IPv6 PIM

Execute display commands in any view.
Task
Display register-tunnel interface
information.
Display BSR information in the
IPv6 PIM-SM domain.
Display information about the
routes used by IPv6 PIM.
Display C-RP information in the
IPv6 PIM-SM domain.
Display DF information in the IPv6
BIDIR-PIM domain.
Display IPv6 PIM information on
an interface.
Display IPv6 PIM neighbor
information.
Display IPv6 PIM routing entries.
Display RP information in the IPv6
PIM-SM domain.
Display statistics for IPv6 PIM
packets.

IPv6 PIM configuration examples

IPv6 PIM-DM configuration example

Network requirements
As shown in
OSPFv3 runs on the network.
•
• VOD streams are sent to receiver hosts in multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist in each stub network.
The entire IPv6 PIM domain is operating in the dense mode.
Figure 104:
Command
snmp-agent trap enable pim6
[ candidate-bsr-win-election |
elected-bsr-lost-election |
neighbor-loss ] *
Command
display interface [ register-tunnel [ interface-number ] ] [ brief
[ description | down ] ]
display ipv6 pim [ vpn-instance vpn-instance-name ] bsr-info
display ipv6 pim [ vpn-instance vpn-instance-name ] claimed-route
[ ipv6-source-address ]
display ipv6 pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
display ipv6 pim [ vpn-instance vpn-instance-name ] df-info
[ ipv6-rp-address ]
display ipv6 pim [ vpn-instance vpn-instance-name ] interface
[ interface-type interface-number ] [ verbose ]
display ipv6 pim [ vpn-instance vpn-instance-name ] neighbor
[ ipv6-neighbor-address | interface interface-type interface-number |
verbose ] *
display ipv6 pim [ vpn-instance vpn-instance-name ] routing-table
[ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | flags flag-value | fsm | incoming-interface
interface-type interface-number | mode mode-type |
outgoing-interface { exclude | include | match } interface-type
interface-number ] *
display ipv6 pim [ vpn-instance vpn-instance-name ] rp-info
[ ipv6-group-address ]
display ipv6 pim statistics
307
Remarks
By default, SNMP notifications for
IPv6 PIM are enabled.