HPE FlexNetwork 5510 HI Series Configuration Manual page 50

[SwitchB-vlan100] port gigabitethernet 1/0/1 to gigabitethernet 1/0/4
# Enable IGMP snooping, and enable dropping unknown multicast data for VLAN 100.
[SwitchB-vlan100] igmp-snooping enable
[SwitchB-vlan100] igmp-snooping drop-unknown
[SwitchB-vlan100] quit
Configure Switch C:
3.
# Enable the IGMP snooping feature.
<SwitchC> system-view
[SwitchC] igmp-snooping
[SwitchC-igmp-snooping] quit
# Create VLAN 100, and assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3 to the
VLAN.
[SwitchC] vlan 100
[SwitchC-vlan100] port gigabitethernet 1/0/1 to gigabitethernet 1/0/3
# Enable IGMP snooping, and enable dropping unknown multicast data for VLAN 100.
[SwitchC-vlan100] igmp-snooping enable
[SwitchC-vlan100] igmp-snooping drop-unknown
[SwitchC-vlan100] quit
Configure Switch D:
4.
# Enable the IGMP snooping feature.
<SwitchD> system-view
[SwitchD] igmp-snooping
[SwitchD-igmp-snooping] quit
# Create VLAN 100, and assign GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 to the VLAN.
[SwitchD] vlan 100
[SwitchD-vlan100] port gigabitethernet 1/0/1 to gigabitethernet 1/0/2
# Enable IGMP snooping, and enable dropping unknown multicast data for VLAN 100.
[SwitchD-vlan100] igmp-snooping enable
[SwitchD-vlan100] igmp-snooping drop-unknown
[SwitchD-vlan100] quit
Verifying the configuration
# Display statistics for IGMP messages and PIMv2 hello messages learned through IGMP snooping
on Switch B.
[SwitchB] display igmp-snooping statistics
Received IGMP general queries:
Received IGMPv1 reports:
Received IGMPv2 reports:
Received IGMP leaves:
Received IGMPv2 specific queries:
Sent IGMPv2 specific queries:
Received IGMPv3 reports:
Received IGMPv3 reports with right and wrong records:
Received IGMPv3 specific queries:
Received IGMPv3 specific sg queries:
Sent IGMPv3 specific queries:
Sent IGMPv3 specific sg queries:
Received PIMv2 hello:
3
0
12
0
0
0
0
0
0
0
0
0
40
0