Setting The Maximum Number Of Igmp Snooping Forwarding Entries; Configuring Static Multicast Mac Address Entries - HPE FlexNetwork 5510 HI Series Configuration Manual

Specifying an IGMP snooping version in IGMP-snooping view
Step
Enter system view.
1.
Enable IGMP snooping
2.
globally and enter
IGMP-snooping view.
Specify an IGMP snooping
3.
version for the specified
VLANs.
Specifying an IGMP snooping version in VLAN view
Step
Enter system view.
1.
Enter VLAN view.
2.
Specify an IGMP snooping
3.
version for the VLAN.
Setting the maximum number of IGMP snooping forwarding
entries
You can modify the maximum number of IGMP snooping forwarding entries, including dynamic
entries and static entries. When the number of forwarding entries on the device reaches the upper
limit, the device does not automatically remove any existing entries. To allow new entries to be
created, remove some entries manually.
To set the maximum number of IGMP snooping forwarding entries:
Step
Enter system view.
1.
Enter IGMP-snooping view.
2.
Set the maximum number of
3.
IGMP snooping forwarding
entries.

Configuring static multicast MAC address entries

In Layer 2 multicast, multicast MAC address entries can be dynamically created through Layer 2
multicast protocols (such as IGMP snooping). You can also manually configure static multicast MAC
address entries by binding multicast MAC addresses and ports to control the destination ports of the
multicast data.
Configuration restrictions and guidelines
When you configure static multicast MAC address entries, follow these restrictions and guidelines:
• You do not need to enable IP multicast routing before this configuration.
• You must specify an unused multicast MAC address when configuring a static multicast MAC
address entry. A multicast MAC address is a MAC address in which the least significant bit of
the most significant octet is 1.
Command
system-view
igmp-snooping
version version-number vlan
vlan-list
Command
system-view
vlan vlan-id
igmp-snooping version
version-number
Command
system-view
igmp-snooping
entry-limit limit
20
Remarks
N/A
N/A
The default setting is 2.
Remarks
N/A
N/A
The default setting is 2.
Remarks
N/A
N/A
The default setting is
4294967295.