Displaying And Maintaining Ipv6 Basics - HPE FlexNetwork 10500 Series Configuration Manual

Step
1. Enter system view.
2. Create a VLAN interface and
enter its view, or enter the
view of an existing VLAN
interface.
3. Enable ND proxy forwarding.

Displaying and maintaining IPv6 basics

Execute display commands in any view and reset commands in user view.
Task
Display IPv6 FIB entries.
Display IPv6 information about the
interface.
Display IPv6 prefix information about the
interface.
Display IPv6 ND snooping entries.
Display the number of IPv6 ND snooping
entries.
(In standalone mode.) Display neighbor
information.
(In IRF mode.) Display neighbor
information.
(In standalone mode.) Display the total
number of neighbor entries.
(In IRF mode.) Display the total number
of neighbor entries.
Display the maximum number of ND
entries that a device supports.
Display neighbor information for a VPN.
Display the IPv6 path MTU information.
Display the IPv6 prefix information.
(In standalone mode.) Display IPv6 and
ICMPv6 statistics.
(In IRF mode.) Display IPv6 and ICMPv6
statistics.
Command
system-view
interface vlan-interface
vlan-interface-id
ipv6 nd proxy-forwarding
Command
display ipv6 fib [ vpn-instance vpn-instance-name ]
[ ipv6-address [ prefix-length ] ]
display ipv6 interface [ interface-type [ interface-number ] ]
[ brief ]
display ipv6 interface interface-type interface-number prefix
display ipv6 nd snooping [ [ [ vlan vlan-id | interface
interface-type interface-number ] [ global | link-local ] ] |
ipv6-address ] [ verbose ]
display ipv6 nd snooping count [ interface interface-type
interface-number ]
display ipv6 neighbors { { ipv6-address | all | dynamic |
static } [ slot slot-number ] | interface interface-type
interface-number | vlan vlan-id } [ verbose ]
display ipv6 neighbors { { ipv6-address | all | dynamic |
static } [ chassis chassis-number slot slot-number ] | interface
interface-type interface-number | vlan vlan-id } [ verbose ]
display ipv6 neighbors { { all | dynamic | static } [ slot
slot-number ] | interface interface-type interface-number | vlan
vlan-id } count
display ipv6 neighbors { { all | dynamic | static } [ chassis
chassis-number slot slot-number ] | interface interface-type
interface-number | vlan vlan-id } count
display ipv6 neighbors entry-limit
display ipv6 neighbors vpn-instance vpn-instance-name
[ count ]
display ipv6 pathmtu [ vpn-instance vpn-instance-name ]
{ ipv6-address | { all | dynamic | static } [ count ] }
display ipv6 prefix [ prefix-number ]
display ipv6 statistics [ slot slot-number ]
display ipv6 statistics [ chassis chassis-number slot
slot-number ]
179
Remarks
N/A
Create the VLAN before you
create the VLAN interface for a
VLAN.
By default, ND proxy forwarding
is disabled.