HPE FlexNetwork 5510 HI Series Configuration Manual page 52

# Enable the IGMP snooping feature.
<SwitchA> system-view
[SwitchA] igmp-snooping
[SwitchA-igmp-snooping] quit
# Create VLAN 100, and assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/4 to the
VLAN.
[SwitchA] vlan 100
[SwitchA-vlan100] port gigabitethernet 1/0/1 to gigabitethernet 1/0/4
# Enable IGMP snooping and IGMP snooping proxying for the VLAN.
[SwitchA-vlan100] igmp-snooping enable
[SwitchA-vlan100] igmp-snooping proxy enable
[SwitchA-vlan100] quit
Verifying the configuration
# Send an IGMP report to join multicast group 224.1.1.1 from Host A and Host B. (Details not
shown.)
# Display information about dynamic IGMP snooping group entries on Switch A.
[SwitchA] display igmp-snooping group
Total 1 entries.
VLAN 100: Total 1 entries.
(0.0.0.0, 224.1.1.1)
Host ports (2 in total):
GE1/0/3
GE1/0/4
The output shows that GigabitEthernet1/0/1 and GigabitEthernet1/0/1 are member ports of multicast
group 224.1.1.1. Both Host A and Host B will receive multicast data for the group
# Display information about IGMP group entries on Router A.
[RouterA] display igmp group
IGMP groups in total: 1
GigabitEthernet1/0/1(10.1.1.1):
IGMP groups reported in total: 1
Group address
224.1.1.1
# Send an IGMP leave message to leave multicast group (224.1.1.1) from Host A. (Details not
shown.)
# Display IGMP snooping group membership information on Switch A.
[SwitchA] display igmp-snooping group
Total 1 entries.
VLAN 100: Total 1 entries.
(0.0.0.0, 224.1.1.1)
Host ports (1 in total):
GE1/0/3
The output shows that GigabitEthernet 1/0/4 (connected to Host A) has been deleted from the entry
of multicast group (224.1.1.1).
Last reporter Uptime
0.0.0.0 00:00:31
(00:04:00)
(00:04:04)
Expires
00:02:03
( 00:01:23 )
42